7.62mm Mould
The company produces and sells all kinds of mold products, including full sets of equipment molds for cupping, first lead, second lead and bullet making. If you send drawings or provide samples, we can draw and provide samples for customers to try.
Product Introduction
The company produces and sells all kinds of mold products, including full sets of equipment molds for cupping, first lead, second lead and bullet making. If you send drawings or provide samples, we can draw and provide samples for customers to try.
|
NO. |
Mold Name |
Model/Drawing No. |
NO. |
Mold Name |
Model/Drawing No. |
|
1 |
Steel Core Blanking Punch Type Return Punch |
GOG4 |
12 |
Third Lengthening Upper Die |
GOK24 |
|
2 |
Steel Core Mold |
GOG6 |
13 |
Third Lengthening Lower Die |
GOK25 |
|
3 |
Steel Core Press In Punch |
GOGQ1 |
14 |
Concave Small Punch |
GOK28 |
|
4 |
First Lengthening Punch |
GOK6 |
15 |
Concave Die |
GOK29 |
|
5 |
First Lengthening Ppper Die |
GOK9 |
16 |
Fourth Lengthening Punch |
GOK30 |
|
6 |
First Lengthening Lower Die |
GOK10 |
17 |
Fourth Lengthening Upper Die |
GOK33 |
|
7 |
Second Lengthening Punch |
GOK14 |
18 |
Fourth Lengthening Lower Die |
GOK34 |
|
8 |
Second Lengthening Guide Die |
GOK17-1Q |
19 |
Incision Punch |
GOK37 |
|
9 |
Second Lengthening Upper Die |
GOK17Q |
20 |
Incision Knife |
GOK40 |
|
10 |
Lengthening lower Die |
GOK18Q |
21 |
Flat Drawing Punch |
GOK41 |
|
11 |
Third Lengthening Diversion Dashes |
GOK21 |
22 |
Flat Bottom Large Mold |
GOK46 |
Due to the different follow-up processes in different countries, the requirements for cups are also different, which can be divided into 7.62mm, 5.56mm, 9mm，12.7mm，14.5mm, etc. according to the caliber.
This product is dedicated to military products and is the main material for bullets. Special specifications and specific requirements Our company will have professional engineers communicate with you for customized production.
Previous: No Information
Next: 5.56mm Mould
Send Inquiry
You Might Also Like
