Deep Stamping Die
The company produces and sells all kinds of mold products, including full sets of equipment molds for cupping, first lead, second lead and bullet making. If you send drawings or provide samples, we can draw and provide samples for customers to try.
Product Introduction
The company produces and sells all kinds of mold products, including full sets of equipment molds for cupping, first lead, second lead and bullet making. If you send drawings or provide samples, we can draw and provide samples for customers to try.
|
NO. |
Mold Name |
Model/Drawing No |
NO. |
Mold Name |
Model/Drawing No |
|
1 |
First Cusp Punch |
GOTK11 |
9 |
Press Forming Return Punch |
GOTZ7 |
|
2 |
First Cusp Die |
GOTK12 |
10 |
Precompression Punch |
GOTZ8 |
|
3 |
Second Cusp Punch |
GOTK14 |
11 |
Prepressing Die |
GOTZ9 |
|
4 |
Second Cusp Die |
GOTK15 |
12 |
Pre pressing Return Flush |
GOTZ10 |
|
5 |
Truncation Punch |
GOTK18 |
13 |
Forming Punch |
GOTZ11 |
|
6 |
Truncation Mode |
GOTK19 |
14 |
Overshoot Punch |
GOTZ12 |
|
7 |
Hemming Punch |
GOTZ5 |
15 |
Overshoot Die |
GOTZ13 |
|
8 |
Forming Die |
GOTZ6 |
16 |
Assembly Punch |
GOZ19-1 |
|
NO. |
Mold Name |
Model/Drawing No |
NO. |
Mold Name |
Model/Drawing No |
|
1
|
Steel Core Blanking Front Knife |
T8.1 |
3 |
Steel Core Punching Short Punching |
T11.1 |
|
2 |
Steel Core Blanking Rear Knife |
T8.2 |
4 |
Micromodule |
T11.2A |
Due to the different follow-up processes in different countries, the requirements for cups are also different, which can be divided into 7.62mm, 5.56mm, 9mm，12.7mm，14.5mm, etc. according to the caliber.
Previous: 5.56mm Mould
Next: Stamping Metal Die
Send Inquiry
You Might Also Like
