Stamping Steel Cups

Due to different follow-up processes in different countries, the requirements for cups and jacket are also different. Our company can customize molds and products according to the drawings and technical requirements provided by customers.

Send Inquiry

Product Introduction

Table 1:

Card number	Code name	Chemical into Points,%
Card number	Code name	C	Si	Mn	P	S	Cr	Ni	Cu	Als
11Al	F11	≤0.11	≤0.06	0.30-0.55	≤0.030	≤0.030	≤0.15	≤0.30	≤0.20	0.02-0.10
18Al	F18	0.11-0.19	≤0.06	0.35-0.55	≤0.030	≤0.030	≤0.15	≤0.30	≤0.20	0.02-0.10

When the carbon content of 18A1 is 0.13% ~0.19%, the lower limit of 0.30% and the maximum limit of 0.60% when the carbon content is less than or equal to 0.12%.

Table 2:

Set.	Table 2
Card	Codena	Sample heat treatment	At the tensile	Elongation gas,%
11Al	F11	920 ±20X3	295~390	>28
18Al	F18	Heat insulation 30min, air cooling	345~440	>26